ArtiLED Quick App for the Fibaro Home Center 3
===============================================

Controls the rooms, zones, lights, scenes and modes of an ArtiLED Hub from the HC3:
in the Fibaro app, in Fibaro scenes and in the HC3 web interface.

Requirements
- Fibaro Home Center 3 (or HC3 Lite / Yubii Home Pro) on firmware 5.150 or newer
- An ArtiLED Hub on the same network, with its IP address and an installer login

Install
1. In the HC3 web interface: Settings > Devices > + Add device > Other device > Upload file.
2. Choose the file ArtiLED_Hub-<version>.fqa. A device named "ArtiLED" appears.
3. Open that device, tab Variables, and fill in:
     HubIP        the IP address of the ArtiLED Hub
     HubUser      the Hub username
     HubPassword  the Hub password
   (or HubToken instead of user and password). Save.
   The Quick App connects, stores a secure token and clears the password field.
4. The device screen now shows "Connected to <Hub name>".

Add rooms, zones, lights, scenes and modes
1. On the ArtiLED device screen choose a Kind (room, zone, light, scene, mode),
   for scenes and modes the room or zone, then the Item.
2. Press Add. A new device appears for it, for example "Living Room".
3. Use it like any Fibaro device: on/off, dimmer and colour; a scene is a switch
   that runs the scene and returns to off.
Remove one by deleting its device in the HC3.

Update
Never import a new version as a second device: that creates new device ids and
breaks the Fibaro scenes that use the old ones. To update, replace the code of the
existing ArtiLED device (Edit > the "main" file), or ask your ArtiLED installer.

Notes
- A Hub name with accents is shown without them on the HC3 (HC3 limitation).
- Brightness above 0 on a room that is off switches it on; turning on a room that
  is already on keeps its current colour.
- Support: https://www.artiled.nl